The Expert and Expert Pro Remote
- 1. Expert 120/130 Pro / 140 Pro & 200 / 220 Pro - Dual Mono 210 Pro / 400 / 440 Pro
- 2. Expert DPremier/250/250Pro - Dual Mono 1000 Pro
- 3. Questions & Answers
Out of the box, the remote control is already paired to your Devialet. Should the link be lost, simply place the remote next to the display of the unit, or even on the Devialet itself, and press any key or turn the volume control knob. The pairing will automatically re-establish.
The Remote control is equipped with a large volume-control knob. It is a "free wheel" - i.e. without an absolute position - that adjusts the volume up or down from its current position.
1. Expert 120/130 Pro / 140 Pro & 200 / 220 Pro - Dual Mono 210 Pro / 400 / 440 Pro
On this Remote there are four buttons:
-
The power button (the isolated key at the top) switches the amplifier On and Off.
-
The source selection button toggles between the available inputs (short press) or indicates the sampling frequency of the incoming signal (long press) for approximately 5s. Note that, in standard operation, doing a short press on the On/Off button located at the front of the amplifier will also toggle through the different sources.
-
The Mute button cuts the sound from the speaker AND the subwoofer or headphone sound. When using a headphone, remember to not check, in the output settings, the option "mute applies".
-
The Tone button opens a smaller menu where you can change the bass and treble settings, as well as the balance. If you need to put a different feature on this button, note that you can still access the tone menu if you press 2s on the middle button (mute button)
2. Expert D Premier/250/250pro & 1000pro
On this Remote there are four buttons:
-
The power button (the isolated key at the top) switches the amplifier On and Off.
-
The source selection button toggles between the available inputs (short press) or indicates the sampling frequency of the incoming signal (long press) for approximately 5s.
-
The Bass button opens a smaller menu where you can change the bass and treble settings, as well as the balance. If you need to put a different feature on this button, note that you can still access the tone menu if you press 2s on the middle button (mute button)
- The phase invert button inverts the phase on the speaker’s output
3. Questions & Answers
-
How to replace the batteries?
The Remote control operates with AAA batteries LR03 1,5V (provided with the product); life span is about 2 years. The battery compartment is located at the back of the Remote. To access the batteries:
- Expert 120/130pro, 200/220pro: rotate the battery trap counter clockwise. Insert the new batteries and lock the battery trap back in place. You might need to once again pair the Remote with your Devialet (see previous section).
- Expert Dpremier, D250/250pro: use an adapted screwdriver on the four corners at the back of the Remote. You can then take out the back cover and access the batteries.
-
Do you recommend a specific brand of batterie?
We do not recommend one brand in particular, but it is advised to use top notch brands such as Alcaline or Duracell.
-
Can I pair more than 1 Remote with the same amplifier?
That is possible with the advanced configurator
-
Can I change the function of some Remote button?
Only the mute & tone/invert can have a different function. These buttons are customisable in the advanced configurator
-
I need the tone function but I don't have enough button available
The tone feature is important, and thus always available. If the button tone serves as another function on the Remote, you can press the mute button 5s to open the same tone menu.
-
Is there a Remote with a screen?
We are currently not able to propose a Remote with a screen. You can however duplicate the display of your amplifier on your phone using our application My Devialet Remote.
Comments
0 comments
Article is closed for comments.