Follow

How to make a Spark's setup with no internet routeur?

To run a setup with Spark, internet is not requiered but you need to have at least a wifi signal. In order to get a wifi signal, we strongly suggest to use an Apple Airport Express. This routeur is very easy to configure and set, also it will provide a wifi signal to your Phantom will allow you to make the setup.

After this setup, you will be able to play music via bluetooth, your local tracks from Spark or via Spotify with your premium account.

As you do not have any internet connection in your setup, you won't be able to play via streaming plateform (such as Tidal, Deezer or Qobuz) within Spark.

 

In order to run the Spark setup, you will need to connect your Phone, Laptop or Tablet device to the Airport Express wifi.

 

 

 

 

Solo setup with no Dialog

(image can be download from the bottom of this article - it's name is Setup AE Solo no internet)

Note: you can if you prefer wired with an ethernet cable the Airport Express to the Phantom, it's the more reliable connectivity. 

 

Solo setup with a Dialog

(image can be download from the bottom of this article - it's name is Setup AE Solo Dialog no internet)

 

Note: Try as much as possible to plug electrically your Dialog and Phantom at the same power stripe, Phantom and Dialog will then communicate via PLC which is a more steady connectivity than Wifi.

 

 

Duo setup with a Dialog

(image can be download from the bottom of this article - it's name is Setup AE DUO no internet)

 

Note: Try as much as possible to plug electrically your Dialog and Phantom at the same power stripe, Phantom and Dialog will then communicate via PLC which is a more steady connectivity than Wifi.

 

 

 

Top 

 

Products: Phantom | Version: ALL

Setup: Solo or Duo | Source type: ALL

Creation date: 29/08/2016 | KB article ID: PH02016

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.