× Recent article

Related article
Follow

How to connect a TV or a CD/DVD/Blu-Ray player to PHANTOM ?

You need a TOSLINK optical cable to connect your TV or CD player output to the TOSLINK input of PHANTOM.   

This new source can then be shared on all the PHANTOM.

Dialog and Phantom have this optical plug

Depending on the device your have connected to your External Source like your TV or your Blu-Ray player, please follow the instructions below:

On Phantom

  1. Open Spark
  2. Select "Settings"
    1. Available bottom part of Left Panel in the Desktop Version of Spark
    2. Available after selecting the 3 dots on the upper ribbon in the mobile version of Spark
  3. Select the "Device" tab
  4. Click on the Plus (+) aside the Phantom device
  5. Enable auto switch optical.

 

 

On Dialog

 

  1. Open Spark
  2. Select "Settings"
    1. Available bottom part of Left Panel in the Desktop Version of Spark
    2. Available after selecting the 3 dots on the upper ribbon in the mobile version of Spark
  3. Select the "Device" tab
  4. Click on the Plus (+) aside the Dialog device
  5. Enable auto switch optical.

 

Note: If there's no sound playing with your Phantom system via optical, please ensure the following:

  • The optical source is in the playqueue 
  • The volume is not too low to be heard.
  • The output device is not playing sounds in DTS or Dolby Digital (this format is not yet compatible with Phantom, but you can still change the output format in your source device settings) 

 

 

Was this article helpful?
9 out of 20 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.