Need help?

How to use the Devialet 200/220 & Devialet 120/130/140 remote control?

Was this article helpful?

1 out of 2 found this helpful


Amplifier & remote control pairing

Out of the box, the remote control is already paired to your Devialet. Should the link be lost, simply place the remote next to the display of the unit, or even on the Devialet itself, and press any key or turn the volume control knob. The pairing will automatically re-establish.


The remote control is equipped with a large volume-control knob. It is a "free wheel" - i.e. without an absolute position - that adjusts the volume up or down from its current position.

Additionally, there are four buttons:

  • The power button (the isolated key at the top) switches the amplifier On and Off.

  • The source selection button toggles between the available inputs (short press) or indicates the sampling frequency of the incoming signal (long press) for approximately 5s. Note that, in standard operation, doing a short press on the On/Off button located at the front of the amplifier will also toggle through the different sources.

  • The Mute button;

  • The Bass button;

Note : that those two last buttons can be configured to a different function such as mute, PreOut or SubOut enabling, etc… through the online Configuration-tool.

Replacing the batteries

The remote control operates with three AAA batteries LR03 1,5V (provided with the product); life span is about 2 years. The battery compartment is located at the back of the remote. To access the batteries, rotate the battery trap counter clockwise. Insert the new batteries and lock the battery trap back in place. You might need to once again pair the remote with your Devialet (see previous section).


Have more questions? Submit a request

Was this article helpful?

1 out of 2 found this helpful



Article is closed for comments.

EU & US Customer Care will be close 1rst June