Through Devialet's Online Configuration tool, you can precisely set the Phono stage's input-characteristics to match your cartridge. Retrieve your cartridge specifications and input the following values:
- Cartridge type: Moving Magnet or Moving Coil
- Output Voltage
- Impedance Load
- Capacitance Load. Note that very few cartridges require a capacitance load.
We advise you to set the RIAA curve to 1976 (inc. a 20Hz bass roll-off) and to leave the sampling frequency to 96kHz as it gives the best signal-to-noise values.
There is additionally a more easier way to update your Phono stage parameter on-the-fly via our RAM menu available directly from your expert amp.
- Select the phono source
- Short press on the tone time, to access the RAM menu.
- Select the EQ curves to fit your best during your listening session
Products: Expert | Version: All
Setup: Stereo/Dual Mono | Source type: Phono
Creation date: 16/11/2016 | KB article ID: EXP02001