Support

Need help?

How to install your Phantom system solo without Dialog?

Was this article helpful?

3 out of 8 found this helpful

Follow

Please carefully unbox your Phantom(s), in the position showed in the picture below (Phantom in front)

Download the Spark application from the following link: www.devialet.com/Spark

 

Follow the following instructions:

  1. Plug your Phantom(s) to the mains .Please wait until your Phantom plays a continuous background sound.

  2. Launch Spark and click on Start.
  3. Installation :
  • Accept the General Condition of Usage.
  • « Do you have a Dialog ? », click on « Not Yet ».
  • If your device on which you installed Spark is connected to your Phantom through Ethernet, please go to the last step. Otherwise please connect to the Wi-fi «PHANTOMSETUP» without closing the Spark application. 
  • Return to Start and follow the instructions in the application
  • Connect again to your home network.
  • Let Spark guide you and then play some music on your devices connected to the same network.

Top

Have more questions? Submit a request

Was this article helpful?

3 out of 8 found this helpful

Follow

0 Comments

Article is closed for comments.