- 1. How to unbox my Phantom?
- 2. What is the best setup for my utilization?
- 3. How to install my Phantom Solo with Spark?
- 4. Any additionals information I need to know?
1. How to unbox my Phantom
Please follow aside instruction to unbox your Phantom
2.What is the best setup for my utilization?
In a solo setup, several options are possible:
- Bluetooth setup
- This setup do not requiered any specific steps to run the setup as this is a real plug and play installation.
- In this setup type, you will only have the possibility to use your Phantom via Bluetooth, of course you can still reset your device in order to run the setup via Wifi if the bluetooth installation is not completly respondiing to your utilization.
- Wifi setup
- This type of setup requiered to use Spark for running the installation and to pilot your system.
- With this type of setup, you will be able to use stream with your Phantom via Airplay, Bluetooth, UPnP or Wifi, this is the reasons why we recommand this setup.
- You can download Spark from the following link here
3. How to install my Phantom solo with Spark?
For installing your Phantom Solo please follow instruction below:
- Plug your Phantom to the mains .Please wait until your Phantom plays a continuous background sound
- Please wait until your Phantom plays a continuous background sound.
Then your Phantom will make a special sound to confirm it's paired to your Dialog.
Verify the device on which you installed Spark is connected to your domestic network by Wi-fi or Ethernet cable.
Launch Spark and click "Start".
- In Spark, accept the General Condition of Usage.
- Let Spark guide you through the process
- Now play some music from your device or from online music streaming services.
4. Any additionals information I need to know?
If you'd like to learn a bit more on how to use Spark and your Phantom please look at the below links:
- How to use Spark?
- How to connect any material to my Syteme via the optical entry?
- What additional accessories I can add into my system?
- How to add sources into Spark?
- How to play Spotify connect in my Phantom's system?
- How can I use Airplay with my Phantom system?
- How can I use UPnP with Phantom?
- I want to add another Phantom in my current system how can I do it?